The following is a selected list of journal and conference publications that have arisen from CARTIS research including research undertaken with our colleagues locally, nationally and internationally. The list will be updated regularly.

2010

Eggbeer D, Evans P. Computer-aided methods in bespoke breast prosthesis design and fabrication. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. In press.

Bibb R, Eggbeer D, Evans P, “Rapid prototyping technologies in soft tissue facial prosthetics: current state of the art", Rapid Prototyping Journal 2010; 16(2): 130-137, http://dx.doi.org/10.1108/13552541011025852

Bibb R, Winder J, “A Review of the Issues Surrounding Three-Dimensional Computed Tomography for Medical Modelling using Rapid Prototyping Techniques”, Radiography 2010; 16: 78-83 http://dx.doi.org/10.1016/j.radi.2009.10.005

2009

Bibb R, Eggbeer D, Evans P, Bocca A, Sugar AW, “Rapid Manufacture of Custom Fitting Surgical Guides”, Rapid Prototyping Journal 2009; 15(5): 346-354, http://dx.doi.org/10.1108/13552540910993879

2008

The CARTIS team all contributed chapters in  Sugar AW, Ehrenfeld M, (eds) “Imaging and Planning in Surgery: A Guide to Research”, 2008, AO Publishing, Dübendorf, Switzerland, ISBN 3-905363-07-0

Bibb R, ''Technological Developments in Medical Applications of Rapid Prototyping & Manufacturing Technology over the last Decade'', Proceedings of Rapid Product Development Society, 9th International Conference on Rapid Product Development, Bloemfontein, South Africa, November 2008, (CD-ROM)

Keating AP, Knox J, Bibb R, Zhurov A, “A comparison of plaster, digital and reconstructed study model accuracy”, Journal of Orthodontics 2008; 35: 191-201, http://dx.doi.org/10.1179/146531207225022626

Thomas D, Bibb R, “Identifying the Geometric Constraints and Process Specific Challenges of Selective Laser Melting”, in Proceedings of Time Compression Technologies Rapid Manufacturing Conference 2008, Rapid News Publications Plc., Coventry, West Midlands, UK, October 2008, (CD-ROM)

Bibb R, “10 Years Progress in Medical Applications of Rapid Prototyping”, in 9th National Conference on Rapid Design, Prototyping & Manufacture, eds Jacobson D, Bocking CE, Rennie AEW, 2008, CRDM/Lancaster University, pp 1-10, ISBN: 978-0-948314-55-1

Thomas D, Bibb R, “An Investigation into the Geometric Constraints of Selective Laser Melting for the Development of Design Rules”, in 9th National Conference on Rapid Design, Prototyping & Manufacture, eds Jacobson D, Bocking CE, Rennie AEW, 2008, CRDM/Lancaster University, pp 11-20, ISBN: 978-0-948314-55-1

2007

Eggbeer D, Bibb R, Evans P, “Digital Technologies in Extra-Oral, Soft Tissue, Facial Prosthetics: Current State of the Art”, Journal of Maxillofacial Prosthetics & Technology 2007, 10: 9-16

Bibb R, “Rapid Manufacturing of Medical Devices using Selective Laser Melting”, Proceedings of the 2nd International Conference on Rapid Manufacturing, Loughborough University, Loughborough, UK, 2007, pp 49-58

Thomas D, Bibb R, “Baseline build-style development of Selective Laser Melting high density functional parts”, in 8th National Conference on Rapid Design, Prototyping & Manufacture, eds Jacobson D, Bocking CE, Rennie AEW, 2007, CRDM/Lancaster University, pp 105-114, ISBN: 9-780948314-537

2006

Eggbeer D, Bibb R, Evans P, “Assessment of digital technologies in the design of a magnet retained auricular prosthesis” The Journal of Maxillofacial Prosthetics & Technology 2006; 9: 1-4, ISSN: 1366-4697

Eggbeer D, Bibb R, Evans P, “Toward Identifying Specification Requirements for Digital Bone-Anchored Prosthesis Design Incorporating Substructure Fabrication: A Pilot Study”, International Journal of Prosthodontics 2006; 19(3): 258-63, ISSN: 0893-2174

Kau CH, Zhurov A, Richmond S, Bibb R, Sugar A, Knox J, Hartles F, “The 3-Dimensional Construction of the Average 11-Year-Old Child Face: A Clinical Evaluation and Application”, Journal of Oral and Maxillofacial Surgery 2006; 64(7): 1086-92, ISSN: 0278-2391, http://dx.doi.org/10.1016/j.joms.2006.03.013

Eggbeer D, Evans P, Bibb R, “A Pilot Study in the Application of Texture Relief for Digitally Designed Facial Prostheses”, Journal of Engineering in Medicine 2006; 220(6): 705-714, ISSN: 0954-4119, http://dx.doi.org/10.1243/09544119JEIM38

Eggbeer D, Bibb R, Evans P, “Specifications for non-contact scanning, computer-aided design and rapid prototyping technologies in the production of soft tissue, facial prostheses”, Proceedings of the 7th National Conference on Rapid Design, Prototyping & Manufacture, June 2006, CRDM/Lancaster University, ISBN: 0-948314-494, pp 67-77

Bibb R, “Medical modelling: the application of advanced design and development technologies in medicine”, Woodhead Publishing Ltd., Abington Hall, Abington, Cambridge, CB1 6AH, October 2006, ISBN: 1-84569-138-5

Eggbeer D, Bibb R, Evans P, “Assessment of digital technologies in the design of a magnet retained auricular prosthesis” The Journal of Maxillofacial Prosthetics & Technology 2006; 9: 1-4, ISSN: 1366-4697

2005

Kau CH, Zhurov A, Bibb R, Hunter L, Richmond S, “The Investigation of the Changing Facial Appearance of Identical Twins employing three-dimensional laser imaging system” Orthodontic & Craniofacial Research 2005; 8: 85-90, ISSN: 1601-6335, http://dx.doi.org/10.1111/j.1601-6343.2005.00320.x

Winder RJ, Bibb R, “Medical Rapid Prototyping Technologies: State of the Art and Current Limitations for Application in Oral and Maxillofacial Surgery” Journal of Oral and Maxillofacial Surgery 2005; 63(7): 1006-15, ISSN: 0278-2391, http://dx.doi.org/10.1016/j.joms.2005.03.016

Bibb R, Eggbeer D, Bocca A, Sugar A, “Rapid design and manufacture of custom fitting stainless steel surgical guides”, Proceedings of the 6th National Conference on Rapid Design, Prototyping & Manufacture, June 2005, CRDM/Lancaster University, ISBN: 0-9737783-1-8, pp 65-72

2004

Eggbeer D, Evans P, Bibb R, “The Appropriate Application Of Computer Aided Design And Manufacture Techniques In Silicone Facial Prosthetics” Proceedings of the 5th National Conference on Rapid Design, Prototyping & Manufacturing, Professional Engineering Publishing, London, UK, 2004, 45-52, ISBN: 1860584659

Sugar A, Bibb R, Morris C, Parkhouse J, “The development of a collaborative medical modelling service: organisational and technical considerations” British Journal of Oral & Maxillofacial Surgery 2004; 42: 323-30, ISSN: 0266-4356, http://dx.doi.org/10.1016/j.bjoms.2004.02.025

Evans P, Eggbeer D, Bibb R, “Orbital Prosthesis wax Pattern Production using Computer Aided Design and Rapid Prototyping Techniques” The Journal of Maxillofacial Prosthetics & Technology 2004; 7: 11-5, ISSN: 1366-4697

Bibb R, Bocca A, Hartles F, “Producing Burns Therapy Conformers Using Non-Contact Scanning and Rapid Prototyping” Proceedings of the 6th International Symposium on Computer Methods in Biomechanics & Biomedical Engineering, Madrid, Spain, February 2004, ISBN: 0-9549670-0-3 (Published on CD-ROM by First Numerics Ltd. Cardiff, UK)

Knox J, Sugar A W, Bibb R, Kau C H, Evans P, Bocca A, Hartles F, “The use of 3D Technology in the Multidisciplinary Management of Facial Disproportion” Proceedings of the 6th International Symposium on Computer Methods in Biomechanics & Biomedical Engineering, Madrid, Spain, February 2004, ISBN: 0-9549670-0-3 (Published on CD-ROM by First Numerics Ltd. Cardiff, UK)

2003

R. Bibb, D. Eggbeer, A. Bocca, P. Evans, A. Sugar, “Design and Manufacture of Drilling Guides for Osseointegrated Implants Using Rapid Prototyping Techniques” Proceedings of the 4th National Conference on Rapid & Virtual Prototyping and Applications, Professional Engineering Publishing, London, UK, 2003, 3-11, ISBN: 1-86058-411-X

Bibb R, Bocca A, Sugar A, Evans P, “Planning Osseointegrated Implant Sites using Computer Aided Design and Rapid Prototyping” The Journal of Maxillofacial Prosthetics & Technology 2003; 6: 1-4, ISSN: 1366-4697

2002

Bibb R, Brown R, Williamson T, Sugar A, Evans P, Bocca A, “The Application Of Product Development Technologies In Craniofacial Reconstruction” Proceedings of the 9th European Conference on Rapid Prototyping and Manufacturing, Athens, 17-19 July 2000, pp 113-22

Bibb R, Bocca A, Evans P, “An Appropriate Approach to Computer Aided Design and Manufacture of Cranioplasty Plates” The Journal of Maxillofacial Prosthetics & Technology 2002; 5(1): 28-31, ISSN: 1366-4697

2000

Bibb R, Lewis A, Brown R, “The application of design methods in medical modelling and reconstructive surgery”, in Enderle JD (ed) Proceedings of the 22nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2000, Vols 1-4, IEEE, New York, USA, pp 2517-2519, ISBN: 0-7803-6466-X

Bibb R, Freeman P, Brown R, Sugar A, Evans P, Bocca A, “An Investigation of three-dimensional scanning of human body parts and its use in the design and manufacture of prostheses” Journal of Engineering in Medicine 2000; 214(H6): 589-94, ISSN: 0954-4119, http://dx.doi.org/10.1243/0954411001535615

Bibb R, Brown R, “The Application of Computer Aided Product Development Techniques in Medical Modelling” Biomedical Sciences Instrumentation 2000; 36: 319-24, ISSN: 0067-8856

Bibb R, Lewis A, Brown R, “The application of design methods in medical modelling and reconstructive surgery” Proceedings of the 22nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Vol. 1-4, Ed: Enderle JD, Chicago, Illinois, USA, 23-28 July 2000, ISBN: 0-7803-6466-X